BDFNN - EC-801 (B-1/2) INDUSTRIAL SEALANT
- MSDS: BDFNN
- Manufacturer: 3M COMPANY
- Product Name: EC-801 (B-1/2) INDUSTRIAL SEALANT
- National Stock Number: 8030-00-174-2599
Product Identification
Product ID:EC-801 (B-1/2) INDUSTRIAL SEALANT
MSDS Date:01/01/1987
FSC:8030
NIIN:00-174-2599
MSDS Number: BDFNN
Responsible Party
ST. PAUL, MN 55144-1000
US
Emergency Phone: 612-733-1110
Info Phone: 612-733-1110
Cage: 76381
Contractor
Telephone: 866-556 5712 / 612-733-1110
Cage: 76381
Ingredients
PETROLEUM BASE SOLVENT
Fraction By Weight: 3.0%
ACGIH TLV: UNK
POLYSULFIDE RUBBER (MFR'S MSDS SHOWS THIS INGRED + NIOSH
Fraction By Weight: UNK
ACGIH TLV: UNK
PHENOLIC RESIN
Fraction By Weight: UNK
ACGIH TLV: UNK
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: UNK
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9192
MAGNESIUM ACETATE(MFR'S MSDS SHOWS THIS INGRED.+ NIOSH
CAS: 142-72-3
RTECS: AI5600000
Fraction By Weight: UNK
ACGIH TLV: UNK
Hazards
Effects of
Overexposure:EYE:IRRIT.SKIN:DEFATTING/DERMATITIS.VAPORS:HEADACHE,NA
USEA & VOMITING.
First Aid
First Aid:EYE:FLUSH WITH WATER 15 MIN,CALL PHYSICIAN.SKIN:WASH WITH
SOAP AND WATER.INHALATION:REMOVE TO FRESH AIR.
Fire Fighting
Flash Point:>100F/37C
Extinguishing Media:CO2,FOAM,DRY CHEM
Accidental Release
Spill Release Procedures:CONTAIN SPILL.CLEAN UP RESIDUE AND AREA OF
SPILL.PLACE RESIDUE IN CONTAINER.
Handling
Handling and Storage Precautions:AVOID EYE CONTACT.AVOID PROLONGED
BREATHING OF VAPOR AND PROLONG OR REPEATED SKIN CONTACT.KEEP
CONTAINER CLOSED WHEN NOT IN USE.
Exposure Controls
Ventilation:MECHANICAL
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
OTHER P/N:SCOTCHSEAL 801(B2) IND SLNT;EC-801 FILLETING SLNT.3M GENERIC
ID#:62-0801-XXXX-X.PT A OF EC-801(B1/2) TWO-PART KIT.OTHER
INGRED:SILICA PIGMENT&WATER. QTY: ONE PT.KEY1:F4.
Chemical Properties
HCC:D1
Spec Gravity:1.36
Solubility in Water:SLIGHT
Appearance and Odor:BLACK,SULFUR ODOR
Percent Volatiles by Volume:3
Stability
Stability Indicator/Materials to Avoid:YES
CO,CO2,SULFUR COMPOUNDS
Disposal
Waste Disposal Methods:MAY BE DISPOSED OF IN A SANITARY LANDFILL
ACCORDING TO LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.